Networking Fundamentals

Lesson 2 of 8

Network Hardware & Topologies

Meet the router, switch, access point and network card, and learn how star, bus and mesh layouts shape a network. Practical: build and break a star network.

🟢 Beginner 50 XP

Learn it

A router joins different networks together — it is the doorway between your home network and the internet.

A switch connects devices inside one network and sends each message only to the device it is meant for. A wireless access point (AP) gives devices Wi-Fi access to the network.

Every networked device has a network interface (NIC) — the hardware that actually sends and receives the signals.

A topology is the shape of a network: who connects to whom. The most common is a star, where every device connects to one central switch or router.

Practical · 25–30 minutes

Build and break a star network

Teacher-provided isolated switch, two devices and spare Ethernet cables; alternatively paper device cards.

Only inspect your own device or teacher-approved equipment and targets. Never change the school network, disconnect shared cables, scan other devices or record passwords. If tools are blocked, use the supplied examples or browser lab.

0/4 steps self-checked · not teacher marked

Key terms

Router
A device that forwards data between different networks.
Switch
A device that connects devices inside one network and delivers data to the right port.
Access point (AP)
Hardware that gives devices wireless (Wi-Fi) access to a network.
NIC
Network interface card — the hardware in a device that connects it to a network.
Topology
The layout shape of a network: star, bus, mesh and so on.
Single point of failure
One component whose failure stops the whole system.

Map a real network

  1. 1Sketch: Draw your home or classroom network as a diagram: which device is the router, which is the switch or access point, and what hangs off them?
  2. 2Label the shape: Which topology is it — star, bus or mesh? Most homes are a star around one router.
  3. 3Find the weak point: Circle the single point of failure in your diagram. What would you add to remove it?

Inside a home router box

textOne box, four jobs:
  MODEM  — talks to your internet provider's line
  ROUTER — decides traffic between your LAN and the internet
  SWITCH — 4 Ethernet sockets for wired devices
  ACCESS POINT — broadcasts your Wi-Fi network

The single box your provider gives you hides a whole networking team. Knowing the jobs helps you troubleshoot: Wi-Fi down but wired fine? The access point part has the problem.

Try it

Match each piece of hardware to its job.

Router
Switch
Access point
NIC
Modem

Challenge

Design a network for a small gaming club with 12 wired PCs, a printer and Wi-Fi for guests. Name every piece of hardware you would buy, draw the topology, and explain one single point of failure and how you could reduce it.

Pick whichever way suits you — every mode earns the same bonus XP.

Write at least 40 more characters to submit.

Mark your own work

Guided walkthrough — 0/2 clues revealed

  1. Clue 1 locked — reveal it only if you get stuck.
  2. Clue 2 locked — reveal it only if you get stuck.

Each clue costs 3 XP (never below 13 XP). You'd earn 25 XP right now.

Quiz time

Question 1 of 3Score 0

What is the main job of a router?

Sources & further reading

Connected courses