Networking Fundamentals

Lesson 8 of 8

Final Project: Design a Network

Bring it all together: plan a complete network for a real place, from hardware and addressing to Wi-Fi and security. Practical: build, test and hand over a small network.

🟡 Intermediate 100 XP

Learn it

Real network design starts with requirements, not hardware: how many people and devices, what they need to do, and what must be protected.

A good design document has four parts: a diagram of the topology, a list of hardware, an addressing plan, and a security plan.

You already know every piece: routers, switches and access points; private IP ranges and DHCP; TCP and UDP; Wi-Fi bands; firewalls and segmentation.

The final test of a design is explaining it: if you can say why each choice was made, you understand it.

Practical · 40–60 minutes

Build, test and hand over a small network

Teacher-approved network simulator such as Cisco Packet Tracer, or an isolated classroom kit. Paper model plus browser lab if neither is available.

Only inspect your own device or teacher-approved equipment and targets. Never change the school network, disconnect shared cables, scan other devices or record passwords. If tools are blocked, use the supplied examples or browser lab.

Repair the classroom network

Browser simulation · no commands run on your device. The workstation must reach the printer and library.example. Find and fix four faults.

Workstation

192.168.20.10

Router

192.168.10.1

DNS server

192.168.10.2

Printer

192.168.10.20

Classroom subnet: 192.168.10.0/24. Router, DNS and printer addresses are already in use.

Run ipconfig to inspect the broken workstation.
0/5 steps self-checked · not teacher marked

Key terms

Requirements
What the network must do: users, devices, services and protection needed.
Addressing plan
Which IP ranges are used and how addresses are assigned.
Capacity
How many devices and how much traffic the network can handle.
Documentation
The written diagram and notes that let someone else run your network.

Design checklist

  1. 1Requirements: Pick your place (a gaming café, a school club room, a small shop). Count users, wired devices, wireless devices and guests.
  2. 2Diagram: Draw the topology: router, switch(es), access points, and every device group. Name the topology you used.
  3. 3Plan: Write the addressing plan (private range + DHCP) and the security plan (zones, firewall rules, guest network, updates).

Example design brief — a chess club room

textREQUIREMENTS: 16 member laptops (Wi-Fi), 1 printer, 4 club PCs (wired), guests at weekend tournaments
TOPOLOGY: star — router -> 8-port switch -> 4 PCs + printer; 1 ceiling access point
ADDRESSING: 192.168.10.0/24 via DHCP; printer fixed at 192.168.10.10
WI-FI: WPA3, both bands, separate guest SSID for tournaments
SECURITY: guest network blocked from club devices; router admin password changed; updates monthly

Notice how every decision traces back to a requirement — and how short a good plan can be when each choice has a reason.

Try it

Order the steps of designing a network.

  • 1Gather requirements: users, devices, services, risks
  • 2List the hardware you need to buy
  • 3Write the addressing plan (range, DHCP, fixed addresses)
  • 4Write the security plan (zones, firewall, Wi-Fi, updates)
  • 5Choose a topology and draw the diagram

Challenge

Produce a complete network design for a place you know — a club, café, shop or your own home upgraded for the future. Include: (1) requirements, (2) a labelled topology diagram, (3) a hardware list, (4) an addressing plan using a private range and DHCP, (5) a Wi-Fi plan naming bands and security standard, and (6) a security plan with at least three defences. Finish with one paragraph explaining your two hardest choices.

Pick whichever way suits you — every mode earns the same bonus XP.

Write at least 40 more characters to submit.

Mark your own work

Guided walkthrough — 0/2 clues revealed

  1. Clue 1 locked — reveal it only if you get stuck.
  2. Clue 2 locked — reveal it only if you get stuck.

Each clue costs 5 XP (never below 25 XP). You'd earn 50 XP right now.

Quiz time

Question 1 of 3Score 0

Why leave spare switch ports and address space in a design?

Connected courses